Oil Purification

PRESSURE FREE SYSTEM

TF 5060PMH

TF5060PMH is designed for hydraulic and lubricating oils. It is NOT intended for pressurized systems or where the cleaning unit is placed lower than the system it will purify. The TF has the ability to “lift/suck” oil into the filter, but must have “free fall” (fall back by gravity) back to the tank/oil reservoir. Water down to 100 ppm. (0.01%) and particles 1-3 microns.

Applications

Hydraulic systems such as balers, compactors, ro-ro equipment. This is mounted on the IBC tank for cleaning oil, such as freezer compressor oil or other places where it is not possible to permanently install the unit, There are two sets of oil in attendance, one to use and one for purification; just select one of the two as needed.

specifications 
  • Capacity: 600 liters/24 hours (single filter)
  • Capacity: 1200 liters/24 hours (twin filter)
  • Oil amount: Up to 3,000 liters (6,000L for twin and 9,000L for triple units)
  • Oil types: All hydraulic- and lubricating oils
  • Viscosity: 32 – 320
  • Max pressure in: 200 bar with reduction valve (Up to 3 bar without reduction valve)
  • Max back pressure: No back pressure
  • Filter use: Approx. 2-4 filters a year with continual use and in normal circumstances
  • Power consumption: 2,400 watt, 230 volt, 16 amp. circuit
  • Connection: 3/8″ BSP external thread inlet, hose clamp outlet

Warranty: 12 months
Weight: 35 kg
Dimensions: 64 x 45 x 47 cm (H x B x D)

TF 2560PMH-SINGLE

TF 2560PMH is designed for pressure-free hydraulic and lubrication oil systems and requires to be installed above the oil tank. 

Applications

Typical applications shipping: Cranes, winches, balers, compactors, ro-ro equipment or directly on top of an oil tank.

Typical applications land based: Hydraulic mechanical equipment, Compactors, elevators, maintenance workshops, entrepreneurs, agriculture, Fish farms and many more.

specifications 
  • Capacity: 600 liters/24 hours
  • Oil types: All hydraulic- and lubricating oils
  • Viscosity: 32 – 320
  • Max pressure in: 300 bar with reduction valve (Up to 3 bar without reduction valve)
  • Max back pressure: No back pressure
  • Filter use: Approx. 2-4 filters a year with continual use and in normal circumstances
  • Power consumption: 1,400 watt, 230 volt, 16 amp. circuit
  • Connection: 3/8″ BSP external thread inlet, hose clamp outlet

Warranty: 12 months
Weight: 20 kg
Dimensions: 45 x 30 x 40 cm (H x B x D)

 

PRESSURIZED SYSTEM

TS 5060PMH

TS 5060PMH is designed for pressurized hydraulic and lubricating systems. This unit can be placed lower than the tank or return point. It can also handle back pressure from the hydraulic system up to 8 bar. The Purifier can be connected directly to the system as a “bypass filtration”.

Applications

Azipods, Thrusters, Stern tube on board vessels. It can also be used on all other hydraulic systems. The Purifiner can purify lubricating systems as well.

specifications 

  • Capacity: 600 litres/24 hours
  • Oil amount: Up to 3 000 liter (oil amount in the system / tank to be cleaned)
  • Oil types: All hydraulic- and lubricating oils
  • Viscosity: 32 – 320
  • Max pressure in: 200 bar with reduction valve (Up to 3 bar without reduction valve)
  • Filter use: Approx. 4 filters a year with continual use and in normal circumstances
  • Power consumption: 2,400 watt, 230 volt, 16 amp. circuit
  • Connection: 3/8″ BSP external thread

Warranty: 12 months
Weight: 45 kg
Dimensions: 64 x 45 x 47 cm (H x B x D)

TS 5060PMH-TWIN

TS5060PMH-Twin has the same properties as the TS5060PMH but a higher capacity. TS-Twin plugs directly into the hydraulic system.

Applications

This unit is widely used for larger systems such as Azipod, Thrusters and Stern Tube on board vessels. Hydraulic central systems. The unit is highly accessible and can be used on any system where you have to collect the oil and return it back into the system.

SPECIFICATIONS 

  • Capacity: 1,200 litre/24 hours
  • Oil amount: Up to 6,000 liters
    (oil amount in system / tank to be cleaned)
  • Oil types: All hydraulic and lubricating oils
  • Viscosity: 32 – 320
  • Max pressure in: 200 bar with reduction valve
    (up to 3 bars without)
  • Filter use: Approx. 4 filters a year with continual use and in normal circumstances
  • Power consumption: 2,550 watt, 230 volt, 16 amp. circuit
  • Connection: 3/8″ BSP external thread

Warranty: 12 mnd.
Weight: 60 kg
Dimensions: 64 x 76 x 47 cm (H x B x D)

TS 5060PMH-TRIPLE

TS5060PMH-Triple has the same properties as the TS5060PMH but a higher capacity. TS Triple is connected directly to the hydraulic system.

Applications

This unit is used extensively for large systems such as Azipod, Thrusters and Stern Tube on board vessels and hydraulic central systems. The unit is highly accessible and can be used on any system where you have to collect the oil and return it back into the system.

specifications 

    • Capacity: 1,800 liters/24 hours
    • Oil amount: Up to 9,000 liters
      (oil amount in system / tank to be cleaned)
    • Oil types: All hydraulic and lubricating oils
    • Viscosity: 32 – 320
    • Max pressure in: 200 bar with reduction valve
      (up to 3 bars without)
    • Filter use: Approx. 4 filters a year with continual use and in normal circumstances
    • Power consumption: 2,550 watt, 230 volt, 16 amp. circuit
    • Connection: 3/8″ BSP external thread

Warranty: 12 months.
Weight: 70 kg
Dimensions: 64 x 76 x 47 cm (H x B x D)

TF 5060C

For Mining and Contractor Machinery
Filters and cleans oil for better quality than new oil free of particles and water. This prolongs oil life 10 to 15 times. Cleaner unit removes particles down to 1 micron. Evaporates all the water, including emulsified water in oil, down to 0.01%. Extends the oil’s quality time. For direct installation on machine.

Applications

Mining and contractor machinery such as excavators, mobile cranes and overhead lifts, etc.

SPECIFICATIONS 

  • Power Supply: 24V
  • Nominal Wattage: 360W / 15A
  • Flow Rate: 600/24H – 25L/H
  • Back Pressure: Max 3 bar
  • Inlet pressure: Max 200 bar
  • Filter: 1-3 micron
  • Water removal: By evaporation
  • Connections: Inlet=10L  Output; 12S

Warranty: 12 months
Weight: 11kg
Dimensions: 38 x 35,5 x 14 (H x B x D)

TS 5060PMH – MOBILE

TS5060PMH-Mobile has the same properties as the TS5060PMH except that the unit is mounted on a trolley, making it easy to move around. Suitable if you have many smaller systems you want to clean.

Applications

Suitable for cleaning many smaller systems such as elevators, presses, overhead lifts, small machinery, cranes, etc. The unit is well suited for rental companies to use on their own and others’ fleet. Service and maintenance firms etc.

SPECIFICATIONS 

  • Capacity: 600 liters/24 hours
  • Oil amount: Up to 3,000 liters
    (oil amount in system / tank to be cleaned)
  • Oil types: All hydraulic and lubricating oil
  • Viscosity: 32 – 320
  • Max pressure in: 200 bar with reduction valve
    (up to 3 bars without)
  • Filter use: Approx. 4 filters a year with continual use and in normal circumstances
  • Power consumption: 2,550 watt, 230 volt, 16 amp. circuit
  • Connection: 3/8″ BSP external thread

Warranty: 12 months.
Weight: 60 kg
Dimensions: 115 x 55 x 50 cm (H x B x D)